Categories
Uncategorized

Dishwasher Belt – Don’t Let It Slip

You have an older dishwasher and it’s serving you well. Let’s make that was serving you well. See, the problem is… fixing it. If your dishwasher has stopped filling or draining all of a sudden or has its moments when it will work and when it won’t – check the belt.

The belt connects the motor to the pump using pulleys. When the motor rotates in one direction the pump fills the dishwasher. When the motor rotates in the opposite direction, the pump drains the dishwasher lg dishwasher repair los angeles.

If your dishwasher isn’t filling or draining at all, the belt could be broken. If your dishwasher occasionally works, the belt is probably stretched and is slipping. Take a closer look at your dishwasher’s belt.

The belt is approximately 25 inches long and made of clear or black rubber. The belt is located behind the lower access panel, which is sometimes referred to as a kickplate. Getting to the belt is easy and since you don’t have pull the dishwasher out from the wall, this repair won’t take long. The only tool you will need is a screwdriver.

Always remember:

It’s important to cut the power source to the dishwasher before attempting any repairs. You can unplug the power cord, remove the fuse from the fuse box, or flip the breaker in the circuit breaker panel. After the power is cut, you may continue.

Open the dishwasher door to locate the screws for the access panel. Once the screws are removed, close the door and remove the panel. The old belt will be stretched a bit making it easier to remove. It will slip down off the pulleys. Replacing the belt is not so simple. It will have a much tighter fit.

The easiest way to get a new belt on the pulleys is to put one end of the belt around the pump housing, directly above the pump pulley. Put the other end of the belt around the motor pulley. Carefully roll the belt down the pump housing until it sits properly in place.

Finally you can reattach the access panel and reconnect the power source. Your old dishwasher is back up and ready to go again.

Categories
Uncategorized

Why It’s Best to Call an Appliances Repair Pro When Your Washing Machine Won’t Fill

Washing machines need water in order to do their job. If water isn’t forthcoming, contact an appliance repair service to find out what might be causing the issue and what needs to be done to fix it.

The washing machine is arguably the most important household invention of the modern age. However, if it stops working correctly, it can become simply the most argued-with household appliance to darken your doorstep. One of the most common issues that comes up with a washer is the water supply lg stove repair los angeles. Normally, when you select your cycle and push, pull, or turn the appropriate knob, the washer starts to fill with water. If that fails to occur, you have a problem on your hands. This malfunction could have to do with your water supply, with your machine’s electrics, or with a mechanical component. In order to fully diagnose and treat the problem, you should contact a washing machine repair expert to come take a look and get everything back on track.

Even though the water supply itself isn’t technically part of the washer, it’s still a potential culprit when it comes to a machine that won’t fill. As an expert who has years of experience with washers of all stripes, your appliance repair services pro will be able to suss out if he or she needs to service or repair washing machine parts on your unit, or if adjustments to the faucets, hoses, or your home water supply will take care of the issue. You can, of course, try looking at those components on your own, but bringing in a pro will ensure that you have covered all your bases and have an accurate diagnosis of the problem.

If you or your appliance pro find that the water supply isn’t to blame, then the filling issue may be part of an electrical problem. We don’t usually see this side of the washing machine, but behind the control panel on the top of the unit lies a complex network of timers, switches, and wiring. If a connection is loose or otherwise faulty, it may well cause a water filling problem. Due to the complex nature of the internal components of the machine, it’s best to have a washer repair pro check this out and do any necessary work to get the water flowing again.

The flip side of the electrical fault possibility is that your washer may be suffering from a mechanical malfunction. The electrical components control the switches and timers that make everything in the washer go, but the individual switch that tells the machine to fill with water–and to stop filling as well–may itself be faulty. Again, contacting an appliance repairs pro is your best option to both diagnose and treat this type of issue, since the complexity and interrelated nature of the electromechanical components of the washer are beyond even most advanced DIY repair practitioners.

If your washer isn’t filling with water, contact an appliance repair expert to help you figure out if the problem is water supply-based, electrical, or mechanical. He or she will be able to quickly and accurately diagnose the issue and complete the necessary work to get your washer filling and back in perfect working order.

Categories
Uncategorized

Can You Settle With Bad Dishwashers?

There are so many bad dishwashers out there even though companies promise that they make the best dishwashers. Do not settle for less! I previously owned two poor quality dishwashers. When I say poor quality, I am talking about dishes that have stains left on them. Not only were there leftover stains, but there were so many water spots. Can you put up with junk like that?

Also, some companies do not honor warranties. No matter how bad the product is samsung dishwasher repair los angeles, it always seems to be “your fault” even though many other consumers complain about the same problems as you. When I was so fed up with my old dishwashers, I decided to just use it as a storage space for my dishes. What else did I get sick and tired of? I spent more money on repairs than actually buying a brand new dishwasher. Every time it was “fixed”, I was giving it hope that it will work fine. Unfortunately, I was spending more and more money on something that was hopeless.

Here are some tips and advice so you don’t end up like me:

1.) Always check consumer reviews of whatever dishwasher that you are planning to buy. Looking at reviews AFTER you bought it might be a bit too late. You can find reviews for anything because you will most likely never be the first one to buy a product.

2.) If other people had fixed it before, were there any more breakdowns a few months later? If yes, you might be better off purchasing a different dishwasher than the one you are looking at.

3.) Don’t always trust the salesman in the appliance store. Sometimes, they are just desperate to make a sale or two. They have to meet a quota, and if they don’t, then they will get fired. One time, I went in this one appliance store, and the salesman was just throwing BS at me. He doesn’t know more than the customers because of the way he was telling me about the products. He was reading it straight out of the sticker when he was telling me the features. Most common lie is when they say that they own the same dishwasher at home as well.

4.) The most expensive dishwasher in store might not always be the best in terms of reliability and durability. I know one that was over $1000, and it broke faster than the one I had previously.